![]() ![]() If this is the case, you’ll need to replace the cords. If the cords are damaged, the multimeter will show a low reading or no reading at all. Once it’s attached, turn on the receiver and check the reading. There are usually two probes that you can attach to the ends of the cords. To use a multimeter, you’ll need to attach it to the cords in question. You can use it to test the cords to see if they’re damaged and to test the receiver itself. If this doesn’t work, I recommend using a multimeter on your receiver.Ī multimeter is a device that can be used to measure voltage, current, and resistance. So, cleaning the jacks can sometimes do the trick. Sometimes pieces of dirt and dust can get in there and prevent the receiver from working properly. Once you’ve cleaned the jacks, re-attach the cables and try turning on the receiver again. ![]() Be sure not to get any alcohol on the cords themselves, as it can damage them. Then, using a small bit of alcohol and a q-tip, clean the area around the jacks. You can start by unplugging everything from the receiver and putting the cables to one side. If there is damage, you’ll need to replace them. Make sure that they’re all plugged in correctly and that there’s no damage to the cords. One of the first things you should do when your Yamaha receiver isn’t producing sound is to check the cords. So if you have been struggling to get any sound out of your receiver, read on for some helpful advice! Cleaning and checking the cords We will also provide some tips and tricks on how to troubleshoot and hopefully fix the problem. In this article, we will explore some of the reasons why your Yamaha receiver might be having issues with producing sound. A receiver is an integral part of every home theater setup.
0 Comments
Leave a Reply. |